Deluxe Motion Activated VCR
Records video only when motion is detected. Our flagship VMD
(video motion detection) chip eliminates the need for a motion
detector (PIR) to activate a VCR. This technology turns this VCR
into a high tech video motion detection activated VCR. Our VMD
chip scans the video image looking for a change in pixels. When
movement is detected the unit is activated for a predetermined
period of time, then shuts off until movement is detected again.
Will record four images from a quad (motion activated). No more
installation of a PIR (motion detector). No more running wires. No
more ultra-limited detection range. This system works with any
wired or wireless video camera. You can choose the area of
detection on the screen to eliminate false alarms from moving
objects, such as moving fans, trees, etc. Also has built-in
sensitivity control and four adjustable detection zones. Records
up to 960hrs of video only when motion is detected. Specs:
|
Format |
VHS Standard |
|
Video Signal |
NTSC |
|
Scanning |
4-Head
Helical |
|
Tape Width |
12.65mm |
|
Play Time |
960 Hr. RealT
w/T-200 Tape |
|
Dimension (L)x(W)x(H) |
14-3/16' x
3-5/8" x 10" |
|
Power
Required |
AC 120 Volts |
|
Current
Consumption |
22 Watts |
MGS-VCR-502-VMD - Deluxe Motion Activated VCR
$742.50*
*options, shipping & handling extra
Tech
Note:
To use with 1 wireless camera: take a 2.4 GHz system and
plug the receiver directly in "video in" of MGS-VCR-502-VMD.
To use with 4
wireless cameras: take the 4-channel quad "video
out" (B/W or color) and plug it into the "video in"
of MGS-VCR-502-VMD. Then take four 2.4 GHz receivers, and plug each
one into a separate channel on the quad. Make sure to order four
different channel cameras.
To use with 4 wired
cameras: take the 4-channel quad "video out" (B/W
or color) and plug it into the "video in" of
MGS-VCR-502-VMD. Then take four 2.4 GHz receivers, and plug each one
into a separate channel on the quad.
|